Using Export Log Files; Automatic Execution Using A Job File - Sony SRPC-5 Operation Manual

Using Export Log Files

When a tape created via exporting at one facility includes
an export log file and is handed over to another facility, the
facility that receives the tape can open the export log file
and view the clips that are recorded on the tape.
In addition, specific clips can be imported to the clip list by
clicking the IMP button in the export log screen. By using
this function, you can specify only the clips you need from
the clips recorded on the tape during import.
For details, refer to the operating instructions for the
HKSR-5804.
Automatic Execution Using a Job
File
Operations such as importing can be automatically carried
out by loading an XML-format job file that you create with
an external editor.
Click the DISK SETUP menu select button on the web
application, and then click the JOB CONTROL tab.
You can load or delete a job file, check its contents,
execute it, and check the results in the JOB CONTROL tab
screen.
Loading a job file
Click the [Browse...] button to the right of the JOB FILE
box in the JOB CONTROL tab screen, specify the job file
stored on the web client disk or external media, and then
click the LOAD button.
Job files that have been loaded can be selected in the
QUEUE box.
Checking the contents of a job file
In the QUEUE box, select the job file that you want to
check, and then click the SHOW button.
The contents of the selected job file are displayed.
Executing a job file
In the QUEUE box, select the job file that you want to
execute, and then click the EXEC button.
The contents of the selected job file are automatically
executed.
Checking the results of an automatic
execution
Log files for job files that have been automatically
executed are stored in the JOB LOG area, each indicated
by the name of job file appended by the date and time of
execution. A log file of a successfully executed job file can
be selected by clicking the SUCCEEDED box, while a log
file of a job file that failed can be selected by clicking the
FAILED box.
After selecting the log file that you want to check its
contents, click the SHOW button to display the contents.
To delete a log file
Select the log file that you want to delete, and then click the
DELETE button.
Deleting a job file
In the QUEUE box, select the job file that you want to
delete, and then click the DELETE button.
About creating a job file
To create a job file using the settings configured in the web
application, configure import settings and other settings in
the IMPORT menu, and then click the START button
while holding down the Shift key. A job file is created
without import taking place.
35
Other Operations