Table of Contents
Advertisement
3
Press the R or r key or turn the MULTI CONTROL
knob to highlight the setting you want to change.
To configure an item for which <SUB> is
displayed
Press the t key to display sub-window, and press the
R or r key or turn the MULTI CONTROL knob to
highlight the setting item you want to change.
To close the sub-window
Press the T key or F10 (EXIT) key.
4
Press the F8 (CHANGE DATA) key.
To configure the field value
Press the center key.
30
VTR Video Data Operations
To restore previous settings
Press the F9 (CANCEL) key.
Executing copy
Note
Confirm the following before copying.
- Ensure that the REMOTE NETWORK 2 button in the
VTR is lit.
- Ensure that "B01:NW I/O MODE" in the VTR SETUP
menu is set to "SRPC".
1
Press the F2 (FILE LIST) key in the SRMemory menu
to display the file menu.
2
Press the R or r key or turn the MULTI CONTROL
knob to highlight the file you want to copy.
Memo
You can scroll through files in groups of 100 by
holding down the SFT key while turning the MULTI
CONTROL knob.
3
Press the F9 (SELECT) key.
"*" appears next to the selected clip.
4
Repeat steps 3 and 4 to select multiple clips.
Advertisement
Table of Contents
