Rear - Sony SRPC-5 Operation Manual

Note
[PC4] Be sure to insert the SRMemory card all the way into
the slot. The card may not lock into place if it is not
inserted completely.
h [PC4] UNLOCK button
Unlocks the SRMemory slot.
Press this button to unlock the slot before removing an
SRMemory card.

Rear

SRPC-5
1 2
SR-PC4
1
a PCIe expansion slot
You can install a commercially available 10GbE card or
eSATA card here.
b NETWORK connector
Connect a network cable here to enable file transfer to the
file server and control of the unit from a web client.
CAUTION
• For safety, do not connect the connector for peripheral
device wiring that might have excessive voltage to this
port. Follow the instructions for this port.
• When you connect the NETWORK cable of the unit to
peripheral device, use a shielded-type cable to prevent
malfunction due to radiation noise.
3 4 5 6 7 8
2
9
0
c [PC5] VTR I/F OUTPUT connector
Connect this to the AUX INPUT connector on a VTR to
output signals to the VTR.
d [PC5] VTR I/F INTPUT connector
Connect this to the AUX OUTPUT connector on a VTR to
input signals from the VTR.
e [PC5] AUX INPUT connector
Used for future expansion. This is not used in this version.
f [PC5] AUX OUTPUT connector
HD SDI signals are output from here for connection to an
HD monitor.
g [PC5] AC IN connector
Connect the power cord here for connection to a power
outlet.
h [PC5] Main power switch
Use this to turn the power supply on/off. During regular
use of the unit, leave the main power switch in the on
position, and use the on/standby button on the front of the
unit to switch between operational mode and standby
mode.
Note
Always make sure that the unit is in standby mode before
setting the main power switch to the off position to turn off
the power.
i [PC4] MONITOR connector
HD SDI signals are output from here for connection to an
HD monitor.
j [PC4] DC IN connector
Connect the supplied AC adapter here and connect it to a
power outlet.
Notes
• Do not use AC adapters other than the one supplied.
• Before disconnecting the AC adapter, always turn off the
unit using the on/standby button on the front panel of the
unit.
11
Names and Functions of Parts