Sony SRPC-5 Operation Manual page 18

1
Click the SRPC SETUP menu button, and click the
MONITOR tab.
The MONITOR tab screen appears.
2
Set the following items.
Underlined values in the table indicate default settings.
Item
[PC5] MODE
(when connected
to VTR)
[PC5] SDI MODE
COLOR SPACE
LUT
RANGE
18
Setup
Function/settings
Selects the storage destination of
the video data to be output to the
monitor.
SRMemory: SRMemory card
video data is displayed in the
monitor.
VTR: VTR video is displayed in
the monitor when VTR is
connected.
Selects the SDI signal type.
1.5G: 1.5G HD SDI output
3G: 3G HD SDI output
Specifies the monitor output
signal type.
RGB 4:4:4: RGB 4:4:4 signal
YCbCr: YcbCr 4:2:2 signal
Selects one of the eight banks.
off: No LUT is used.
BANK1 to BANK8: The LUT in the
specified bank is applied to
the monitor output.
S-log1/2 to REC709 (800):
Converts files filmed by F65 in
S-log to REC709.
Specifies whether the monitor
output signal is extended from
Head to Full before the LUT and
compressed from Full to Head
after the LUT.
Pre(HtF) checkbox: Check this
box to extend the effective
signal range of a monitor
output signal with headroom
to full range before the LUT.
Post(FtH) checkbox: Check this
box to compress a full range
monitor output signal to the
effective signal range of a
monitor output signal with
headroom after the LUT.
Item Function/settings
CROP POS (4K) Sets the position to crop the 1920
(only enabled when sample from the resized 2048
the system format wide sample.
is F65RAW) –128~+128 sample (in samples of
2): The set value will be held
until the unit is turned off.
EI Sets the sensitivity (EI value).
(only enabled when Auto: The EI value is set
the system format automatically.
is F65RAW) XXX: The EI value is set manually.
Left: [PC5] Outputs the Link A
3D MODE
signal from the AUX OUTPUT
A connector, and the Link B
signal from AUX OUTPUT B
connector.
[PC4] Outputs the Link A
signal from the MONITOR
OUT connector.
Right: [PC5] Outputs the Link B
signal from the AUX OUTPUT
A connector, and the Link A
signal from AUX OUTPUT B
connector.
[PC4] Outputs the Link B
signal from the MONITOR
OUT connector.
H Split(L/R): Splits the display
horizontally with the Link A
signal output on the left side,
and the Link B signal output
on the right.
H Split(R/L): Splits the display
horizontally with the Link B
signal output on the left side,
and the Link A signal output
on the right.
V Split(L/R): Splits the display
vertically with the Link A
signal output on the top, and
the Link B signal output on
the bottom.
V Split(R/L): Splits the display
vertically with the Link B
signal output on the top, and
the Link A signal output on
the bottom.