Table of Contents
Advertisement
Item
[PC5] PROXY DIR
(VTR mode only)
Saving and Recalling GUI
Configuration Data
GUI configuration data is temporarily saved in your
browser's cookies.
By naming this configuration data and saving it to the
mounted file server, you can recall the data later to restore
the previous configuration.
1
Click the PROXY SETUP menu button in the web
application screen, and click the COOKIE tab.
16
Setup
Function/settings
Determines the directory where
the generated proxies are stored.
Same as Main Files: Proxies are
stored in the same directory
as the main picture files.
Proxy Directory: "proxy/" directory
is automatically created right
under the directory where the
main picture files are stored.
Proxies are stored in the
"proxy/" directory.
Resolution directory: When the
main picture files are stored
in directories labeled
according to size (e.g., 1920
× 1080), a directory for
storing small-size picture files
(e.g., 320 × 180) is created to
store proxies. When the main
picture files are not stored in
directories according to
picture file size, proxies are
stored in the same directory
where their main picture files
are stored.
When importing files, a
directory for storing main
picture files and a directory
for storing their proxies
labeled according to size
(e.g., 1920 × 1080, 320 ×
180) are created directly
under the specified directory.
The main picture files and
their proxies are stored in
these directories.
When importing
uncompressed files, note that
the "Resolution directory"
setting is not applied when
FILE DIR in the DISK
CONTROL tag display of the
IMPORT menu is set to "Org
Structure" and the original
picture files are not stored in
the directory according to
size. When FILE DIR is set to
"All Files into Selected
Directory," directories
according to size are created.
The COOKIE tab screen appears.
2
Enter a name for the cookie in the NAME box of the
SAVE area, and then click the SAVE button.
The entered file name is automatically appended with
the date.
Then, the cookie is stored in the directory for cookies
on the mounted server.
To recall GUI setup data
Click the NAME box of the LOAD/DELETE area, select
the stored cookie, and then click the LOAD button.
Selecting "Factory Preset" at this time resets the GUI
settings to their default values.
To delete GUI setup data
Click the NAME box of the LOAD/DELETE area, select
the stored cookie, and then click the DELETE button.
Configuring the Monitor Output
Signal
You can select the type of SDI signal that is output from
the AUX OUTPUT connector ([PC5]) or MONITOR
connector ([PC4]) on the rear of the unit.
1
Click the DIAGNOSIS menu button in the web
application screen, and click the SYSTEM FORMAT
tab.
The SYSTEM FORMAT tab screen appears.
Advertisement
Table of Contents
