Table of Contents
Advertisement
To select all files displayed in the list
Press the F9 (SELECT) key while holding down the
SFT key.
Note
Selecting all files is enabled after obtaining data (when
the "retrieving data" sign disappears) on files in the
SRMemory card.
To view a selected file list
Press the F2 (COPY LIST) key.
The File No. of the files being copied and the total
selected files appear.
To delete individual files from the list
1 Press the R or r key or turn the MULTI CONTROL
knob to highlight the file you want to delete.
2 Press the CLR key.
To delete all files from the list
Simultaneously press the SFT key and CLR key.
To edit the IN/OUT point in copy files
See "Editing the Copy File IN/OUT Point" on page
32.
5
Press the F1 (SRMem EDIT) key to open the edit
screen.
6
Set the IN point of the copy VTR.
To set the IN point of the VTR using numeric
keys
1 Press the RECORDER button to set to
RECORDER mode.
2 Input the timecode in the scratchpad using numeric
keys.
3 Press the SET key.
4 Press the VIDEO IN key.
To set the current timecode as a IN point of
the VTR
1 Press the RECORDER button to set to
RECORDER mode.
2 Simultaneously press the ENTRY key and VIDEO
IN key.
7
Press the REC/EDIT button.
Copy starts.
To confirm the copy progress status
Press the F3 (COPY LIST) key. The copy list appears
so the File No. of the files being copied can be
confirmed.
When copying is complete, the file changes to a
shaded display.
31
VTR Video Data Operations
Advertisement
Table of Contents
