Sony SRPC-5 Operation Manual page 15

2
Set the following items.
Underlined values in the table indicate default settings.
Item Function/settings
GUI TYPE Selects the size of the proxy and
whether the jog dial appears or
not in the GUI.
Normal Proxy without JOG Dial:
Normal Proxy with JOG Dial: The
Large Proxy without JOG Dial:
[PC5] This setting also determines
the file size of the proxy that is
generated automatically when
transferring data to a VTR.
Note
The proxy that appears in the
DISK SETUP menu is always
displayed with a 320-pixel width,
regardless of this setting.
GUI MODE Selects how the items in the
display are shown.
Tab: Items are divided into
Flat: Items are shown in one
FORMAT Selects the file type of the proxy
displayed on the GUI.
BMP: Bitmap
JPG: JPEG
[PC5] This setting also determines
the type of the proxy file that is
generated automatically when
transferring data to a VTR.
The proxy is displayed with a
320-pixel width. The jog dial
does not appear in the MEM
CONTROL display or the
VTR/MEM CONTROL
display.
proxy is displayed with a 320-
pixel width. The jog dial
appears in the MEM
CONTROL display or the
VTR/MEM CONTROL
display.
The proxy is displayed with a
640-pixel width. The jog dial
does not appear in the MEM
CONTROL display or the
VTR/MEM CONTROL
display.
multiple tab displays.
display.
Item Function/settings
MODE Selects the display mode of the
proxies that appear in the GUI
during tape playback.
Normal: Displays the picture.
Waveform(Parade): Displays the
waveforms (red, green, and
blue).
Waveform(Red): Displays the
waveform (red).
Waveform(Green): Displays the
waveform (green).
Waveform(Blue): Displays the
waveform (blue).
Vector: Displays the vector scope.
Vector(×2): Displays the vector
scope at 2-fold magnification.
WF TYPE Selects the drawing method of the
waveform.
Dot: Dots
Line: Lines
WF OVERLAY Selects the display method of the
waveform(s).
off: Does not display the picture.
Only the waveform(s) is (are)
displayed.
on: Waveform(s) is (are) displayed
over the picture.
on(Mix):Waveform(s) and the
picture are mixed and
displayed.
WF ALPHA Specifies the waveform
transparency when the
waveform(s) and the picture are
mixed.
Low: Low transparency
Middle: Medium transparency
High: High transparency
[PC5] AUTO GEN
Determines whether or not
(VTR mode only) proxies are automatically
generated.
disable: Proxies are not generated
automatically.
enable: When previewing files in
the clip list and when
transferring files to VTR,
proxies are automatically
generated for picture files that
do not have their own proxies.
enable(as Temporarily): Proxies
are generated for display on
the GUI. However, the
generated proxies are not
stored on the disk.
Note
[PC5] Due to system limitations,
during the export of
uncompressed data, proxies are
not generated for main picture
files that are greater than about
62 MB.
15
Setup