3.15 PROTOCOL DOWNLOAD MODE
Allows the operator to download user specific data from a host system. Use the buttons of the printer's
operator panel to select and enter the required options.
This feature is valid only for SBPL specification.
Refer to the Menu Definition Tables in this chapter to provide an explanation of each menu screen.
MENU
USER DOWNLOAD
PRESS LINE KEY
USER DOWNLOAD
WAITING
GZ4e Series Operator Manual
Send ESC+DW2 command to
configure DWS2-7 to ON
+ LINE + POWER On
USER DOWNLOAD
PRESS LINE KEY
LINE
USER DOWNLOAD
WAITING
download data
Power printer off,
Figure 3-13, User Download Mode
USER DOWNLOAD MODE (TABLE 3-9)
Is the first menu screen of the User Download Mode and provides a prompt to
proceed. Pressing the LINE button will place the printer in a condition waiting for the
data to be received.
Confirms the printer is on standby for receiving user download data. The
downloaded data received from the host shall be written in the main ROM. Entry is
not required.
No action,
FEED
no change
Send
Printer
Receives
data
to exit
DESCRIPTION
Section 3: Configuration and Operation
Page 3-35