Features Of The Printer; Unpacking; Included Accessories - SATO GZ4e Series Operator's Manual

Section 1: Introduction

1.1 FEATURES OF THE PRINTER

The SATO GZ4e Series printers (Thermal Transfer or Direct Thermal) are complete, high-performance
labeling systems designed specifically for printing labels.
The key features of the GZ4e Series are:
• Combo interface (Equipped with High speed RS-232C, Parallel IEEE1284 and USB interface and
EXT port)
• GB18030 Chinese codepage support (Only for China model)
• European codepage support (Only for European model)
• SZPL emulation ready
• Cutter, dispenser with liner (backing paper) internal rewinder options
• Easy media loading
• Easy maintenance

1.2 UNPACKING

When unpacking the printer, take note of the following:
1. The box should stay upright. Lift the printer out of the box carefully.
2. Remove all the packaging from the printer.
3. Remove the accessory items from their packaging.
4. Set the printer on a solid, flat surface. Inspect the shipping container and printer for any sign of damage
that may have occurred during shipping. Please note that SATO shall hold no liability of any damage of any
kind sustained during shipping of the product.
Notes:
• If the printer has been stored in the cold, allow it to reach room temperature before turning it on.
• Please do not discard the original packaging box and cushioning material after installing the printer. They
may be needed in future, if the printer needs to be shipped for repairs.

1.2.1 Included Accessories

After unpacking the printer, verify that you have the following materials:
User Documents
(Quick Guide, Warranty, etc)
Cleaning Sheet Set
* The shape of the power plug varies depending on the region in which it was purchased.
Page 1-2
AC Power cord*
Ribbon Core
USB cable
(for Combo interface model)
GZ4e Series Operator Manual