Custom Protocol Command Codes Download - SATO E series Programming Manual

Section 6: Configuration Commands
Custom Protocol Command Codes
COMMAND STRUCTURE
COMMAND FUNCTION
PRINTER INPUT
PRINTER OUTPUT
Page 6-2
Download
<ESC>LD,a,b,c,d,e,f,g,h,i,jj
a = Replacement character for STX
b = Replacement character for ETX
c = Replacement character for ESC
d = Replacement character for ENQ
e = Replacement character for CAN
f = Replacement character for NUL
g = Replacement character for OFFLINE
h = Auto-Online. Printer powers up in the On Line mode.
0 Yes
1 No
i = Zero Slash. Places a slash through the "0" character.
0 Yes
1 No
Hexadecimal code for Eurocharacter
jj =
Example: <ESC>LD,{,},%,#,&,*,~,0,0,D5
Placement: Immediately following the <ESC>A Start command and
in an independent data stream.
Default: Standard Protocol command Codes
Allows the user to defines custom Protocol Command codes.
<ESC>A
<ESC>LD,{,},%,#,&,*,~,0,0,D5
<ESC>Z
A Protocol Command code status label will be printed as a result of the a
successful download of a custom set of Protocol Command codes.
SATO Programming Reference