Dip Switch Settings; Communication Setting - SATO GZ4e Series Operator's Manual

Section 7: Interface Specifications
7.6 WIRELESS LAN ETHERNET (Cont'd)
7.6.2 LINK/STATUS LED (Cont'd)
LED ON
PLATE
LINK
STATUS
Wireless

7.6.3 DIP Switch Settings

SWITCH
1
2
3
4

7.6.4 Communication Setting

COMMUNICATION
PROTOCOL
DSW2-8 OFF
Page 7-12
SPECIFICATIONS
COLOR
Green
Orange Blink: Lights for a certain period when receiving packet by the wireless LAN.
Green
DIP SWITCH SETTINGS
LAN/ Wireless LAN board EEPROM initialization (configuration).
Communication mode (OFF: Ad hoc mode, ON: Infrastructure mode)
SPECIFICATIONS
RECEIVE NUMBER OF
MODE
DSW2-5 ON
DSW2-5 OFF
DESCRIPTIONS
•Blink: Waiting for detecting Link of wireless LAN.
•ON: Linking with wireless LAN.
•OFF: Wireless LAN is not in use.
•Blink: Ad hoc mode.
•ON: Infrastructure mode.
SETTING
Reserved (setup prohibited).
Print configuration details on a label.
PORTS
2 ports
1024: Receive (Protocol for driver)
1025: Transmit
2 ports
1024: Receive (Protocol for driver)
1025: Transmit
STATUS DESCRIPTIONS
Status4 Cyclic response mode
Status4 ENQ response mode
GZ4e Series Operator Manual