Add Paper Symbol - Toshiba 3560 Operator's Manual

2. ADD PAPER
When the paper supply in the selected cassette
or large-capacity feeder runs out, the
corresponding cassette symbol flashes on the
screen and this message appears:
ADD PAPER
Add paper as described below.
Note: The paper feeding pedestal is optional.
Adding Paper to the Front Cassette
1 1 1 1 1
Pull out the cassette slowly until it comes
to a stop.
2 2 2 2 2
Holding the whole ream of paper as
shown, place it in the cassette.
G Up to 600 sheets of paper (recommended
by Toshiba) can be set.
G Do not add paper above the line on the
back guide.
G Do not use creased, folded, wrinkled or
damp sheets of paper.
Note: Check that there is a slight gap (about
0.5 mm) left between the paper and each of
the side guides as shown; the total gap
should not exceed 1 mm. If the gap is not
suitable, paper misfeeding may possibly
occur.
120
SYMBOL
Limit line
Side guide
0.5 mm
Side guide
0.5 mm