Toshiba 3560 Operator's Manual page 63

2 2 2 2 2
Press the DUPLEX key on the BASIC
panel. Select the 1 2 mode (SINGLE-TO-
DUPLEX).
G This message will appear (see the middle
figure):
EVEN or ODD number
of originals?
Note: If the STACK
remove the paper remaining in the automatic
duplexer. If the messages
To remove paper from
duplexer: Press INFO
and
Remove paper from
duplexer
appear, press INFO and the sheets of paper
will automatically exit.
3 3 3 3 3
Press the Original Count, EVEN or ODD
key in response to the message.
G If you press the Original Count key, this
message appears:
WAIT
Counting originals
The document feeder will feed in and
count the originals. When it finishes
counting, the following message will
appear:
Return originals on
doc. feeder input tray
Then reset the originals in the original
feed tray in the same way as described in
step 1.
symbol is flashing,
SPECIAL FUNCTIONS
61