Toshiba 3560 Operator's Manual page 15

COPY SIZE Keys (v page 40)
Use these keys to select the desired size of
paper.When the paper supply of the selected
size runs out, the corresponding cassette will
flash and the message "ADD PAPER" will be
displayed on the Message Display panel.
AUTOMATIC PAPER SELECTION
Key ( page 22)
Normally, the automatic paper selection (APS)
mode is selected. The copier will automati-
cally detect the size of the original and
select the same size of paper (for actual-size
copying only).
AUTOMATIC MAGNIFICATION SELECTION
Key ( page 38)
When you select the automatic magnification
selection (AMS) mode with this key and set
the desired copy size, the copier will auto-
matically detect the size of the original and
calculate the correct reproduction ratio.
CLEAR/STOP Key (
Use this key to correct the copy quantity
entered or stop a multicopy run. During
multicopying, pressing this key once will stop
the copy run and pressing it twice will clear the
copy quantity to "1".
200%
F C
100%
INFO
50%
1 2 3
4 5 6
7 8 9
0 C/
PRINT
Press this key to start copying.
DIGITAL Keys
Use these keys to enter the desired number
of copies. Up to 999 copies can be set.
AUTO-EXPOSURE
Normally, the auto-exposure mode is se-
lected. The copier will automatically detect
the density of the original and select the
optimum exposure for the original.
MANUAL EXPOSURE
(
In the manual exposure mode, the desired
copy density can be selected. Pressing the
LIGHT
exposure steps and vice versa.
PHOTO
To make clear copies of photographs,use this
mode.
page 23)
ORIGINAL COPY
A4
A3
B4
A5
UNIVERSAL
AMS APS
DESCRIPTION OF THE COPIER
Key ( page 24)
Key (
page 44)
key will lighten the copy in five
Key ( page 45)
page 44)
Keys
13