Toshiba 3560 Operator's Manual page 45

5 5 5 5 5
After interrupt copying is finished take the
original off the glass and press the
INTERRUPT
G This message will appear:
Ready to resume job 1
6 6 6 6 6
Reset the first original(s).
G Reset the first original on the glass.
G Or according to the message displayed,
return the one or two originals to the
original feed tray and reset the originals,
if the automatic document feeder was
used:
Put last 1 original
in doc. feeder input tray
or
Put last 2 originals
in doc. feeder input tray
7 7 7 7 7
Press the PRINT
G The remaining number of copies of the
previous multicopy run will be made
automatically.
key again.
key.
HOW TO MAKE COPIES
43