Configuring The Management Module Card For Remote Access - HP R12000 User Manual

Option number
4
0
Web Access submenu
Option number
1
2
0
Remote Console submenu
Option number
1
2
0
Configuring the Management Module card for remote
access
Use the Management Module Service Menu to configure the minimum settings required to access the
Management Module card remotely using the web interface. You can configure other settings using this utility
in conjunction with a terminal emulation program.
The IP address assigned to the Management Module card must be fixed. If the IP address changes:
•
The UPS loses communication with the Management Module web interface.
•
You can lose track of the Management Module card URL.
To configure the Management Module network parameters:
If your network is configured with a DHCP server, the network settings are automatically assigned.
1.
Verify and note the assigned values.
If your network is not configured with a DHCP server:
2.
On the Main menu, enter 1 at the prompt to open Module Configuration submenu.
a.
Enter 2 at the prompt to enter the Network Configuration submenu.
b.
Enter 1 at the prompt to enter the Network Settings submenu.
c.
In the Network Settings submenu, change the mode used to acquire a network IP address to static
d.
IP.
You can also change the IP address, subnet mask, and default gateway of the Management Module card.
Submenu
Reset Login Retry Count For All
Users
Previous Menu
Submenu
Enable/Disable Web Access
HTTP/HTTPS Configuration
Previous Menu
Submenu
Enable/Disable Telnet
Change Telnet Port
Previous Menu
Description
Enables you to reset all locked out sessions
Returns to the previous menu
Description
Turns web access on or off
Configures the port for HTTP or HTTPS
Returns to the previous menu
Description
Enables or disables telnet access
Changes the port for telnet
Returns to the previous menu
Configuration 70