Installing The Management Module Card In The 2U Power Unit - HP R12000 User Manual

Connecting the network cable to the 1U power unit
Connect the Management Module card to a network or Internet connection with an RJ-45 Ethernet cable.
A network-connected computer can be used to login to the Management Module web interface for remote
access to the Management Module card and to view information about the DirectFlow UPS. To access the
Management Module web interface, see "Accessing the Management Module (on page 63)."

Installing the Management Module card in the 2U power unit

IMPORTANT:
Module card.
To install the card in the UPS:
Remove the two screws securing the cover plate on the power unit, and then slide the plate out.
1.
It is not necessary to power down the UPS before installing the Management
Installation 60