HP R12000 User Manual page 40

Install the mounting ears on the chassis using the screws provided.
4.
With one person on each side, lift the chassis to rail level and slide the chassis on the mounting rails.
5.
For shipping or relocating a populated rack, secure the rear of the chassis to the rails by mating the
chassis slots to the shipping bracket tabs.
Attach the chassis to the rack using the supplied screws.
6.
To complete the installation, see the following instructions:
Removing the 3U battery bracket (on page 41)
1.
Installing the lead acid batteries (on page 41)
2.
Replacing the 3U battery bracket (on page 42)
3.
Attaching the 3U front bezel (on page 42)
4.
Connecting the 3U battery pack to the 1U power unit (on page 42)
5.
Connecting the 3U battery pack to the 2U power unit (on page 45)
6.
Charging lead acid batteries
7.
Installation 40