Removing A Gpgpu4 Module - QUANTA STRATOS S210 Series S210-X2A2J Technical Manual

I H
NSTALLING ARDWARE

Removing a GPGPU4 Module

WARNING!
!
Keep the dummy bracket installed together with the GPGPU
bracket even if no GPGPU or MIC presented.
The GPGPU4 module has three SKUs: M2075/M2090, Xeon
Phi™, K520/K10/K20/K20X.
Prerequisite:
Remove the top cover. See Opening the Top Cover .
1. Remove the screw(s) securing the GPGPU4 assembly to
the chassis.
2. Release the GPGPU4 assembly from the tabs on the
chassis.
Removing GPGPU4 Assembly
3. Place the GPGPU4 assembly on the surface, board side
upwards.
4. Remove the screw(s) securing the GPGPU4 module to
the assembly.
5. Disconnect the GPGPU4 module from the GPGPU riser
card.
2-38
R GPGPU4 M
EMOVING A ODULE