QUANTA STRATOS S210 Series S210-X2A2J Technical Manual page 185

BMC
This Active Directory Settings page in MegaRAC SP-X as
shown on the following figure, allows to Configure Active Direc-
tory Server Settings.
To open Active Directory Settings page, click Configuration >
Active Directory from the main menu. A sample screenshot of
Active Directory Settings Page is shown in the following screen-
shot:
Active Directory Settings Page
Active Directory Settings Page
I
TEM
Active Directory advanced settings configuration
options are as follows:
Enable Active Directory Authentication,

Advanced Settings User Domain name,

Time Out, and

Up to three Domain Controller Server

Addresses.
D
ESCRIPTION
4-19
Active Directory Settings Page (Continued)
I
TEM
The name that identifies the role group in the
Active Directory.
Role Group Name is a string of 255 alpha-

Role Group ID
numeric characters.
Special symbols hyphen and underscore are

allowed.
This name identifies the role group in Active
Directory.
Note:
Group Name
Role Group Name is a string of 255 alpha-

numeric characters.
Special symbols hyphen and underscore are

allowed.
The domain where the role group is located.
Note:
Domain Name is a string of 255 alpha-
Group Domain 
numeric characters.
Special symbols hyphen, underscore and dot

are allowed.
Group Privilege The level of privilege to assign to this role group.
Add Role Group To add a new role group to the device.
To modify that role group. Alternatively, double
Modify role Group
click on the configured slot.
Delete Role Group To delete an existing Role Group.
C G
ONFIGURATION ROUP
D
ESCRIPTION