Bmc Firmware Update - QUANTA STRATOS S210 Series S210-X2A2J Technical Manual

BMC

BMC Firmware Update

In MegaRAC GUI, this wizard takes you through the process of
firmware up gradation. A reset of the box will automatically fol-
low if the upgrade is completed or cancelled. An option to pre-
serve configuration will be presented. Enable it, if you wish to
preserve configured settings through the upgrade.
WARNING!
!
Please note that after entering update mode widgets, other web
pages and services will not work. All open widgets will be
closed automatically. If upgrade process is cancelled in the mid-
dle of the wizard, the device will be reset.
Note:
The firmware upgrade process is a crucial operation. Make sure
that the chances of a power or connectivity loss are minimal
when performing this operation.
Once you enter into Update Mode and choose to cancel the
firmware flash operation, the MegaRAC
This means that you must close the Internet browser and log
back onto the MegaRAC
other types of operations.
®
card must be reset.
®
card before you can perform any
To open Firmware Update page, click Maintenance > BMC
Firmware Update from the main menu. A sample screenshot
of Firmware Update Page is shown in the screenshot below.
BMC Firmware Update Page
Procedure:
Click Enter Update Mode to upgrade the current device firm-
ware. As below step by step:
1. Closing all active client requests.
2. Preparing device for firmware upgrade.
3. Uploading firmware image.
4. Verifying firmware image.
4-59
M G
AINTENANCE ROUP