Removing A Gpgpu3 Module - QUANTA STRATOS S210 Series S210-X2A2J Technical Manual

I H
NSTALLING ARDWARE

Removing a GPGPU3 Module

WARNING!
!
Keep the dummy bracket installed together with the GPGPU
bracket even if no GPGPU or MIC presented.
The GPGPU3 module has three SKUs: M2075/M2090, Xeon
Phi™, K520/K10/K20/K20X.
Prerequisite:
Remove the top cover. See Opening the Top Cover .
1. Remove the screw(s) securing the GPGPU3 assembly to
the chassis.
2. Release the GPGPU3 assembly from the tabs on the
chassis.
Removing GPGPU3 Assembly
3. Remove the screw(s) securing the GPGPU3 module to
the assembly.
4. Disconnect the GPGPU3 module from the GPGPU riser
card.
2-28
R GPGPU3 M
EMOVING A ODULE