Fan Module; Removing A Fan Module - QUANTA Rackgo X Series F03A Technical Manual

I H
NSTALLING ARDWARE

2.4 Fan Module

The system fan cage includes six (6) fan modules. The modules can be removed and
installed.
In the following illustration the fan modules are numbered as defined by the location on
the midplane board.
0

Removing a Fan Module

The system supports six hot-swap fan modules.
CAUTION!
!
E
NSURE ALL POWER IS DISCONNECTED FROM THE SYSTEM BEFORE PROCEEDING
1. Locate the fan assembly to remove.
2. Press up on the tray release lever on the fan tray.
1 2
Figure 2-6. Fan Module Identification
3 4
.
F M
AN ODULE
5
2-6