I
H
NSTALLING
ARDWARE
2.13. Power Distribution Board
Removing a PDB
Prerequisite:
Remove the top cover. See Opening the Top Cover .
1. Remove the screw(s) securing the PDB to the chassis.
2. Release the PDB from the PSU cage and guide pins.
3. Remove the PDB.
1
PSU cage
2
Removing PDB
1
1
1
1
3
Front
Installing a PDB
Prerequisite:
Remove the top cover. See Opening the Top Cover .
1. Align the screw holes on PDB with the screw holes on the
chassis.
2. Guide the edge of the PDB under the PSU cage.
3. Install the PDB.
4. Slide to secure the PDB to the guide pins on the chassis.
2-69
P
D
B
OWER
ISTRIBUTION
OARD