Front Panel User Interface; Power Button; Id Button; Leds - QUANTA STRATOS S210 Series S210-X2A2J Technical Manual

BMC

Front Panel User Interface

The BMC provides control panel interface functionality including
indicators (Fault/status and Identify LEDs) and buttons (Power/
ID).

Power Button

As previous described, the Power buttons provide one of the
sources for system status control.

ID Button

The control panel Chassis Identify button toggles the state of
the Chassis ID LED. If the ID LED is off, then a button press will
turn the LED on (blinking). If the LED is on, a button press or
IPMI Chassis Identify command will turn the LED off.

LEDs

The following table contains information on Status, ID and
Heartbeat LED's
Status LED, ID LED, and Heartbeat LED
LED C
S OLOR
Status LED Amber
ID LED Blue
Heartbeat
Green
LED
The following table contains information on Status LED when
amber blinking.
4-2
F P U I
RONT ANEL SER NTERFACE
S D
TATUS ESCRIPTION
System Event
Blinking
(See following Status LED
table.)
Off Normal status
Off Normal status
Identify the system with
Blinking
interval
Solid On Identify the system
Solid On/
BMC is not Ready
Off
Blinking BMC is Ready