QUANTA STRATOS S210 Series S210-X2A2J Technical Manual page 201

BMC
PEF Management LAN Destination Page
This page is used to configure the Event filter, Alert Policy and
LAN destination. A sample screenshot of PEF Management
LAN Destination Page is given below.
PEF Management LAN Destination
The fields of PEF Management – LAN Destination Tab are
explained below.
PEF Management - LAN Destination
I
TEM
Displays Destination number for the newly con-
LAN Destination
figured entry (read-only).
D
ESCRIPTION
4-35
PEF Management - LAN Destination (Continued)
I
TEM
Destination type can be either an SNMP Trap or
an Email alert.
For Email alerts, the 3 fields - destination Email
address, subject and body of the message
needs to be filled. The SMTP server information
Destination Type
also has to be added - under
> SMTP
For SNMP Trap, only the destination IP address
has to be filled.
If Destination type is SNMP Trap, then enter the
IP address of the system that will receive the
alert. Destination address will support the follow-
ing:
Destination Address
IPv4 address format.

IPv6 address format.

If Destination type is Email Alert, then give the
email address that will receive the email.
These fields must be configured if email alert is
chosen as destination type. An email will be sent
to the configured email address in case of any
Subject & Message
severity events with a subject specified in sub-
ject field and will contain the message field's
content as the email body.
To save the new LAN destination and return to
Add
LAN destination list.
To cancel the modification and return to LAN
Cancel
destination list.
Procedure:
C G
ONFIGURATION
D
ESCRIPTION
Configuration
.
ROUP