Installing And Removing The Power Supply; Installing And Removing The Battery; Connecting And Disconnecting The Power Cable - Panasonic AG-HPG10P Operating Instructions Manual

Installing and removing the power supply

Installing and removing the battery

Insertion
1
Insert the battery until it clicks into place.
CH 1 AUDIO CH 2
COMPONENT OUT
OPEN

Connecting and disconnecting the power cable

Insertion
1
Connect the DC cord to the AC adapter.
2
Connect the AC power supply cord into the
power outlet.
3
Insert the DC cord's battery connector until
it clicks into place.
CH 1 AUDIO
DC cord's
OPEN
battery
connector
OUTPUT
VIDEO HD/SD-SDI
1394
OUTPUT
CH 2 VIDEO HD/SD-SDI
COMPONENT OUT 1394
Removal
1
Press [POWER] for at least 2 seconds to
turn the power off, and check that the power
lamp has gone off. (Page 18)
2
Remove the battery while pressing the
battery eject button.
• Support the battery with your hand to ensure
that it will not drop down.
AUDIO
CH 1
OPEN
Battery
eject
button
Removal
1
Press [POWER] for at least 2 seconds to
turn the power off, and check that the power
lamp has gone off. (Page 18)
2
Remove the DC cord's battery connector
while pressing the battery eject button.
3
Disconnect the AC power supply cord from
the power outlet.
• The battery cannot be charged when power is
supplied to the unit from the AC adapter.
• The AC adapter is designed to work anywhere
in the world with supply voltages ranging from
100 V to 240 V and with power line frequencies
of 50 Hz and 60 Hz. However, in some countries
the shape of the power outlet receptacle differs.
In cases like this, obtain the plug that will fit the
receptacle. Obtain the conversion plugs after
consulting with your dealer.
• When the unit is not being used, disconnect the
AC cable from the power outlet.
OUTPUT
CH 2 VIDEO HD/SD-SDI
COMPONENT OUT 1394
17