Display Setup Screen - Panasonic AG-HPG10P Operating Instructions Manual

List of setting menus (continued)

DISPLAY SETUP screen

Item
VIDEO OUT OSD
DATE/TIME
LEVEL METER
CARD/BATT
P2CARD REMAIN
OTHER DISPLAY
LCD BACKLIGHT
LCD SET
LCD REVERSE
80
When ON is selected as this item's setting, the information displayed on the LCD
monitor is output as a video output signal together with the video signals. (Component
output signals, VIDEO output signals, SDI output signals)
ON, OFF
<Note>
Warnings are not displayed with component outputs or SDI outputs.
This is used to select the setting for displaying the date and time on the LCD monitor
and video output signals.
OFF:
The date and time are not displayed.
TIME:
The time is displayed.
DATE:
The date is displayed.
TIME&DATE:
The date and time are displayed.
This is used to set the audio level meter display to ON or OFF.
ON, OFF
This is used to set the display of the amount of memory remaining on the card and
charge level remaining in the battery to ON or OFF.
ON, OFF
This is used to set how the display of the amount of memory remaining on the P2 card
is to be calculated.
ONE-CARD:
The amount of memory remaining on the P2 card in the selected slot is calculated.
TOTAL:
The amount of memory remaining on the P2 cards in both slots is calculated.
This is used to set the amount of information to be displayed on the LCD monitor.
(Page 71)
OFF, PARTIAL, ALL
This is used to adjust the backlight of the LCD monitor. The backlight becomes
brighter than usual when HIGH is selected.
HIGH, NORMAL
This is used to adjust the display level of the images on the LCD monitor. (Page 22)
LCD COLOR LEVEL
LCD BRIGHTNESS
LCD CONTRAST
This is used to set the function for reversing the top/bottom and left/right of the images
displayed on the LCD monitor.
NORMAL:
The images are displayed normally.
REVERSE:
The images are displayed with their top/bottom and left/right reversed.
<Note>
The direction in which the menu highlighting moves and the direction of the cursor
movement on the thumbnail display screen cannot be reversed in either the up/down
or left/right direction.
Description of settings
The underlined settings are the factory mode settings.