Menu Operations - Panasonic AG-HPG10P Operating Instructions Manual

Menu operations

This unit is provided with three kinds of screens: the thumbnail display screen, thumbnail display off screen
(1394 input recording standby mode, playback standby mode) and PC mode screen. When [MENU/MODE
CHK] is pressed on any of these screens, the menu will be displayed. (No menus are displayed in the USB
DEVICE mode or 1394 DEVICE mode.)
Operations performed when the function buttons are pressed
This is used to move the menu
highlighting to the item on the left;
depending on the menu item, it is
used to change the value.
This is used to display
the menus. When it is
pressed while a menu is
displayed, the menu is
exited.
Example of a menu operation: (when the
thumbnail display screen is displayed)
1
Press [MENU/MODE CHK] to display the
menu.
This is used to move the menu highlighting to the item above;
depending on the menu item, it is used to change the value.
This is used to move the menu highlighting to
the item below; depending on the menu item, it
is used to change the value.
This is used to select items and
enter their values. When there is a
sub-menu, it is used to display the
sub-menu.
This is used to move the menu
highlighting to the item on the right;
depending on the menu item, it is
used to change the value.
AG -H PG
10
2
Press and to move the menu
highlighting, and select the item.
3
Press .
• If another menu has been displayed, repeat
steps 2 and 3.
• Depending on the item, the value is changed
using , , and
• Depending on the item, a confirmation screen
will be displayed.
• Depending on the item, the original screen is
restored automatically.
4
Press [MENU/MODE CHK] to exit the menu.
For details on the menu operations on the
thumbnail display off screen, refer to "Basic
operations on the setting menus" on page 74.
.
19