Table of Contents
Advertisement
Starting the Product
7.
7.1. Before starting
Check the following items before starting the product.
■
Installation conditions
Check the product is installed horizontally.
■
Connection of cables
Check the power, ground and communications (optional) cables arecorrectly connected.
7.2. Power supply
•
Supply the power by turning on the breaker on the rear.
Turn the power switch inside the front right cover to ON.
•
Breaker
•
When the power is correctly turned on, the POWER LED on the display panel of this product will turn to
ON (Other LEDs will be OFF).
•
When connecting to the application software, initialization will be executed and measurement will
become available.
Power switch
16
Advertisement
Table of Contents
