Clip Management; Selecting Clips; Deleting Clips - Panasonic AG-HPG10P Operating Instructions Manual

Clip management

Selecting clips

When performing operations on the thumbnail display screen, select the clip which will be the target of
these operations as follows.
1
Using or , move the yellow frame
(cursor) to the target clip.
2
Press .
A bluish-green frame now appears at the clip
where the cursor is positioned to indicate that
the clip has been selected.
To release the selection
1
Move the cursor to the selected clip, and
press again.
The selection is released.
• By repeating steps 1 and 2, you can select a multiple number of clips.
• To move from one page to another, press

Deleting clips

You can delete unwanted clips from the P2 card by proceeding as follows.
1
Display the thumbnail display screen.
2
Select the clips to be deleted.
3
Press [MENU/MODE CHK].
4
Using , and , select "OPERATION"
– "DELETE", and press
5
Select "YES", and press
6
When the completion message has
appeared, press "OK" ( ).
• It may not be possible to delete clips for which the
is displayed.
or of
.
.
X defective clip indicator or
.
unknown clip indicator
?
35