Hard Drive Data Display - Panasonic AG-HPG10P Operating Instructions Manual

Hard drive data display

You can display the hard drive information.
1
Switch to the USB HOST mode.
2
Connect the USB hard drive.
3
Press [MENU/MODE CHK].
4
Using , and , select "HDD" –
"EXPLORE", and press
The hard drive information is displayed.
With a TYPE S or P2STORE hard drive
7
1
2
3
4
5
6
With FAT
1
2
3
4
.
1. PARTITION Type of hard drive
2. VENDER Name of vender
3. MODEL Hard drive model name
4. SIZE Total memory size of hard
drive
5. USED Amount of hard drive
memory used (unit: GB) and
area of P2 card used (unit:
cards)
6. REMAIN Remaining hard drive
memory (unit: GB)
7. Partition number Partition (unit equivalent to
one P2 card) number inside
hard drive
• Using and , you can switch the display
between the list with the dates/times and the
names of the partitions given by the user.
• While the thumbnail display of the hard drive is
on the screen, press [MENU/MODE CHK], and
select "OPERATION" – "CHANGE PARTITION
NAME". You can now give a name (consisting of
up to 20 characters) to the partition.
59