Deleting Text Memos; Dividing And Copying Clips Using Text Memos; Replacing Thumbnail Images - Panasonic AG-HPG10P Operating Instructions Manual

Deleting text memos

1
Proceed with steps 1 to 4 in "Playback from
text memo position", and select the text
memos in the clips.
2
Move the cursor to the text memo to be
deleted, and press
3
Press [MENU/MODE CHK], and then select
"OPERATION" – "DELETE" using
.
4
Select "YES", and press
The text memo is now deleted.
Dividing and copying clips using text
memos
1
Proceed with steps 1 to 4 in "Playback from
text memo position," and select the text
memos in the clips.
2
Move the cursor to the text memo to be
copied, and press
A multiple number of text memos can be
selected.
3
Press [MENU/MODE CHK], and then select
"OPERATION" – "COPY" using
and press .
4
Using or and
copy destination card, select "YES", and
press .
Copying is now executed.
5
When the completion message has
appeared, press "OK" ( ).
• The block between the selected text memo and
the next text memo is copied. If there is no text
memo after the selected text memo, the block
from the text memo position to the end of the clip
will be copied.
• While copying is underway, the progress made
in copying and cancel are displayed. To stop the
copying at any time, press
confirmation screen now appears. Using
, select "YES".
.
, and
.
.
, and
, select the slot with the
. The "YES/NO"
and

Replacing thumbnail images

The thumbnail display images of the clips to which
text memos were added at the top of the LCD
monitor screen can be replaced with still images to
which the time stamps were added at the bottom
of the screen.
1
Proceed with steps 1 to 4 in "Playback from
text memo position."
2
Using or , move the cursor to the still
image to which the time stamp number
has been added and whose thumbnail is
displayed, and press [MENU/MODE CHK].
3
Using , and
– "EXCH. THUMBNAIL", and press
4
Select "YES", and press
The thumbnail display is replaced with the
selected still image.
• You can view the thumbnail change position
(number of frames from the start) using the clip
information display "THUMBNAIL" item. (Page
39) "0" is normally displayed for the thumbnail of
the start frame.
• Playback from a thumbnail begins from the start
of the clip even when the thumbnail has been
changed.
,
, select "OPERATION"
.
.
47