Qos Configuration - Avaya 3600 Series Installation Instructions Manual

4.5.3 QoS Configuration

If QoS Configuration is selected from the SVP-II Configuration screen.
1. From the main menu, scroll to SVP-II Configuration and press Enter.
2. Select QoS Configuration.
Tags set packet priorities for QoS. Either DSCP or 802.1p tags may be used.
DSCP Tag
·
DSCP (Differentiated Services Code Point) is a QoS mechanism for setting relative priorities. In the IP header,
packets are tagged with a DSCP field for type of service.
Traffic Class
·
Administration
·
Tags set the priority for Telnet, TFTP and other administrative traffic. Administrative traffic can have the lowest
priority because it does not require voice quality.
WT (In call)/WT (Standby)
·
In call traffic requires voice quality and may be set to a higher priority than standby traffic.
RTP
·
Audio traffic to the IP PBX. It requires voice quality.
PBX
·
Traffic not audio to the PBX.
Inter-SVP2
·
The information passing protocol the AVPP servers use to communicate with each other.
3600 Series Phone Installation
IP Office 15-601082 Issue 06a (21 February 2014)
Page 64