Ip Office Avpp Setup - Avaya 3600 Series Installation Instructions Manual

Ip office phone

Hide thumbs Also See for 3600 Series:

Table of Contents

3.4.2 IP Office AVPP Setup

This process is used to add the network location of the AVPP unit to the IP Office configuration.

1. Start IP Office Manager and receive the configuration from the IP Office control unit.

2. Click on

System.

3. Select the System tab.

4. Set the AVPP IP Address to match the static IP address of the AVPP unit.

· If the IP Office is being used for DHCP support of the 3600 Series phones, set the TFTP Server IP Address to

match the IP address of the TFTP server from which the 3600 Series handsets should get their software.

· If otherwise, the location of the TFTP server for the 3600 Series phones should be set through the DHCP

server or through the configuration of the handsets if using static IP configuration.

5. Click OK. Click

control unit. Click OK.

3600 Series Phone Installation

IP Office

or select File | Save Configuration to send the updated configuration back to the IP Office

15-601082 Issue 06a (21 February 2014)

Page 32

Table of Contents