Configuring Proxy Settings; Figure 56: Mac Network Screen; Figure 57: Select Manually From The Configure Drop-Down List - Hughes HN9400 User Manual

Computer settings

Configuring proxy settings

Figure 56: Mac Network screen

3. Ensure that the TCP/IP tab is selected.
4. Select Manually from the Configure drop-down list as shown in
from the configure drop-down list

Figure 57: Select Manually from the configure drop-down list

5. Select the desired IP address. There may be only one address available or a range of available
addresses, depending on your service plan.
For additional information, see
page 53.
6. Click Apply Now to close the screen and complete the configuration.
If your web browser cannot connect to the Internet, check the browser's proxy settings. If the
browser is configured for the computer to use a proxy server to connect to the Internet, try
changing the setting to not use a proxy server.
These steps explain how to configure Internet Explorer to not use a proxy server.
1. Turn the computer on and open Internet Explorer.
2. Select Tools → Internet Options.
on page 67.
Understanding the router address and computer address
HN9400 Satellite Router User Guide
1038555-0001 Revision B
Appendix A
Figure 57: Select Manually
on
67