Front Panel Leds; Figure 24: Front Panel Leds On The Hn9400 Router; Table 8: Front Panel Led Indications - Hughes HN9400 User Manual

Chapter 3

Front panel LEDs

LED Appearance
LAN
Blinking
Transmit
Blinking, mostly on
Blinking, mostly off
Receive
HN9400 Satellite Router User Guide
28
1038555-0001 Revision B
The satellite router has five LEDs on the front panel, as shown in
on the HN9400 router on page 28. By their appearance—on, off, blinking, or flashing—the
LEDs indicate the router's operating status. All are blue when lit. The front panel LEDs are all
blue when lit.

Figure 24: Front panel LEDs on the HN9400 router

Table 8: Front panel LED indications

LEDs are on, off, or blinking. On means the LED is continuously lit. Blinking means the LED
is usually on, but intermittently turns off briefly. Flashing means the LED alternates between
on and off for periods of ½ sec to 1 sec.
Table 8: Front panel LED indications
On Satellite router is connected to a computer network card or Ethernet device
Transmitting and/or receiving data
Off No device is connected to the LAN port or the device connected to the LAN
port is not working properly
On OK – Transmit path is operational
Transmitting data
Ranging (The router is measuring the distance to the satellite to calibrate
transmit timing and transmit power.)
Off * Condition preventing transmission
On OK – Receive path is operational
Figure 24: Front panel LEDs
on page 28 explains what the router status is when the
Satellite router status
LEDs