Table 4: System Status - Hughes HN9400 User Manual

System Control Center
Parameter
Signal Strength
Receive Status
Transmit Status
Software Download Status
Service Status
TCP Acceleration Status
Web Acceleration Status
The System Status page and other System Control Center pages show information that may be
particularly useful for advanced users and for troubleshooting.
Figure 12: System Status page
The parameters listed on the System Status page are explained in the following table.
Table 4: System Status page parameters
Receive signal strength. A value of 30 or less indicates a weak
signal.
Indicates if the receive data path is operational or other status. Click
the displayed RxCode for explanation of the displayed code.
Indicates if the transmit data path is operational or other status.
Click the displayed TxCode for corresponding Help information.
Indicates if the satellite router's software and configuration are up
to date.
Indicates if the router has been commissioned (registered with the
system). Click the Service History link if you want to see a history
of your customer account.
Indicates if TCP Acceleration is operational or other status. TCP
acceleration improves the router's performance.
Indicates if Web Acceleration is operational or other status. Web
acceleration improves web browsing performance.
This field is present only if the NOC operator has enabled Web
Acceleration on the satellite router.
Explanation
HN9400 Satellite Router User Guide
1038555-0001 Revision B
Chapter 2
17