Upgrading Firmware Using Ip Utility - EverFocus EPN4122 User Manual
Epn series ip speed dome
Hide thumbs
Also See for EPN4122:
- User manual (110 pages) ,
- Quick installation manual (14 pages) ,
- User manual (112 pages)
Table of Contents
Advertisement
8. Upgrading Firmware Using IP Utility
You can upgrade the Firmware using the IP Utility software included in the software CD.
1.
Install and then start the IP Utility
2.
IPU will automatically search the cameras connected in the LAN. The default network values of
the cameras will be displayed. By default, the network protocol of the camera is DHCP.
3.
Select a camera and then click Login/Multi Login to log in the camera.
4.
Type the user ID and password. Click OK.
Note:
1. The default user ID is user1 and the default password is 11111111.
2. If you select more than one camera that has the same user ID / password, you will be able
to log in several cameras at once.
. The following dialog box appears.
88
EPN Series
Advertisement
Table of Contents
