Accessing The User Interface; Checking The Dynamic Ip Address - EverFocus EPN4122 User Manual

4. Accessing the User Interface

This section explains how to access the Web interface of the camera for configuration.

4.1 Checking the Dynamic IP Address

You can look up the IP address and access the Web interface of the camera using the IP Utility (IPU)
software, which is included in the software CD.
1. Install and then start the IPU program
2. IPU will automatically search the cameras connected in the LAN. The default network values of
the cameras will be displayed. By default, the network protocol of the camera is DHCP.
3. To configure the network settings, select a camera and then click Login/Multi Login to log in.
4. Type the user ID and password. Click OK.
Note:
1. The default user ID is user1 and the default password is 11111111.
2. If you select more than one camera that has the same user ID / password, you will be able
to log in several cameras at once.
. The following dialog box appears.
21
EPN Series