EverFocus EPN4122 User Manual page 69

1. Click the Program button, the Privacy Masks panel appears.
2. To set up a Privacy Mask, select a Privacy Mask number from the Privacy drop-down list. Click
enable to enable the Privacy Mask function.
3. Click the Add button, a Privacy Mask (rectangle) appears in the middle of the image. And the
Adjust Height / Adjust Width buttons will be activated.
4. Use the direction buttons to adjust the camera view to a desired position where you want to apply
the Privacy Mask. You can select the pan / tilt speed from the PT Speed drop-down list for
controlling the direction buttons. Adjust zoom, focus and Iris if necessary.
5. To adjust the height / width of the privacy mask, click the
6. Follow Step 2 to 5 to set up another Privacy Mask.
7. Click Apply to apply the settings.
If you select a Privacy Mask number that has been configured, these buttons
will be activated, meaning that you can test, edit or delete the configured Privacy Mask settings.
To apply the color for the Privacy Masks, select B/W or Color from the Mode drop-down list and then
select a level / color from the Level drop-down list. You can only apply one color for multiple Privacy
Masks.
Click Apply to apply the settings, or click Reset to reset without saving the settings.
63
EPN Series
buttons.