Ddns - EverFocus EPN4122 User Manual

7.3.2

DDNS

DDNS (Dynamic Domain Name System) is a service used to map a domain name to the dynamic IP
address of a network device. You can set up the DDNS service for remote access to the IP camera.
DDNS assigns a domain name (URL) to the IP camera, so that the user does not need to go through the
trouble of checking if the IP address assigned by DHCP Server has changed. Once the IP is changed, the
IP camera will automatically update the information to the DDNS to ensure it is always available for
remote access.
Before enabling the following DDNS function, user should have applied for a host name from the DDS
service provider's website. We support these four DDNS server providers:
www.everfocusddns.com, www.sitelutions.com, www.dyndns.com, and www.no-ip.com
Note: We highly recommend that you use xxxx.everfocusddns.com for the simplicity of setting up
your IP cameras.
【DDNS Settings】
Enable: Check this box to enable the DDNS function.
Service ISP: You can either apply for a host name from EverFocus or other DDNS server providers.
If you choose the EverFocus DDNS server, you can obtain a free host name from EverFocus by
following the steps below:
From EverFocus: To obtain a free host name from EverFocus, type a desired host name in the
•
textbox, click the Register / Update button, and then click the Apply button.
From other DDNS server providers: To obtain a domain name from one of the three DDNS server
•
providers, you have to register your name with the provider first, and then select the provider and
fill in the required information. Please refer to the specific DDNS company's website for further
information.
Record ID: Type the record ID if provided by the DDNS server provider.
FQDN: Type the fully qualified domain name applied from the DDNS server provider. For example,
xxxx.dyndns.com
Username / Password: Type the login account of your DDNS server provider.
44
EPN Series