EverFocus EPN4122 User Manual page 49

IP address: When DHCP is not used, the user needs to manually enter the IP address of the camera.
Do not enter an IP address that is already used for your computer or other network cameras.
Subnet Mask: This field is used to set the subnet mask for your network, so that the IP camera will
be recognized within the network. Example: 255.255.255.0. When DHCP is selected, the DHCP
server will assign this value automatically.
Gateway: This field is used to set the gateway for your network so that the IP camera will be
recognized within the network. When DHCP is selected, the DHCP server will assign this value
automatically.
Primary DNS: Enter the IP address of the DNS server if this is provided by an ISP.
Secondary DNS: If your ISP provided you with a secondary DNS address, please enter it here.
Username: Enter the account's username (used only for PPPoE).
Password: Used only for PPPoE.
IPv6: Enter the IPv6 details in this area, if this applies to your system.
Click Apply to apply the setting changes or Reset to reset without saving the change.
【Port Settings】Enter the HTTP, HTTPS and RTSP port numbers and click Apply to save.
【Multicast Settings】Enable if required, fill in the setting options and click Apply to save.
43
EPN Series