Ekb200 - EverFocus EPN4122 User Manual

7.10

EKB200

You can connect an EKB200, which is EverFocus' USB keyboard, to the USB port on the computer to
remotely control the Iris, focus or the pre-configured PTZ control functions of the connected cameras.
For details on how to configure the PTZ control functions on the Web interface, including Preset
Position, Auto Pan, Tour and Pattern, please refer to 7.5.1 PTZ Control.
After connecting the EKB200 keyboard to the computer and configuring the PTZ control functions on
the Web interface, you need to configure the above setup page to define the function for each control
key on the keyboard. Click the Apply button to save the settings. Once you press the control key on the
keyboard, the camera will do the action which you've defined for the key.
【Key No】The control key number on the keyboard.
【Action】Select an item from the drop-down list to define the function for each key on the keyboard.
Set Preset: You can use the joystick on the keyboard to select a position and then press this key to

save the position as the Preset Position.
Goto Preset: Press this key to let the camera go to the Preset Position number specified in the Value

column.
Goto Home: Press this key and the camera will go to the Preset Position 1.

Clear Preset: Press this key to clear the Preset Position number specified in the Value column.

Run AutoPan: Press this key to start the AutoPan number specified in the Value column.

Stop AutoPan: Press this key to stop the AutoPan number specified in the Value column.

Tour Run: Press this key to start running the Tour number specified in the Value column.

Tour Stop: Press this key to stop running the Tour number specified in the Value column.

Pattern Run: Press this key to start running the Pattern number specified in the Value column.

Pattern Stop: Press this key to stop running the Pattern number specified in the Value column.

The control keys on the EKB200
86
EPN Series