Assembling The Forward Gear; Assembling The Oil Seal Housing; Assembling The Drive Shaft - Yamaha F30A Service Manual

NOTE:
Be sure to select the pinion shim(s) if replac-
ing the pinion, taper roller bearing, or lower
case. To select the shims, see "Shimming"
(6-21).
Driver rod LS 8: 90890-06606
Bearing outer race attachment 9:
90890-06627

Assembling the forward gear

1. Install a new taper roller bearing onto the
forward gear.
1
G
Bearing inner race attachment 1:
90890-06640

Assembling the oil seal housing

1. Apply grease to a new oil seal, and then
install it into the oil seal housing to the
specified depth a.
A A
NOTE:
Install an oil seal halfway into the oil seal
housing, and then install the other oil seal.
67C3K11
S67C6109
1
2
a
S67C6045
Drive shaft and lower case
Driver rod LS 1: 90890-06606
Ball bearing attachment 2:
90890-06634
Installation depth a:
0–0.5 mm (0–0.02 in)

Assembling the drive shaft

1. Install the taper roller bearing onto the
drive shaft.
1
G
Bearing inner race attachment 1:
90890-06644
1
2
3
1
4
S67C6096
5
6
7
8
9
6-16