Yamaha F30A Service Manual page 148

POWR
3. Install the apron and oil dipstick.
4. Connect the shift link rod 5, and then
install the clip 6.
6
5. Connect the throttle cable and shift
cable, and then adjust them.
NOTE:
To adjust the throttle cable and shift cable,
see "Adjusting the throttle cable" (3-8) and
"Checking the gear shift operation" (3-9).
6. Connect the flushing hose 7, cooling
water hose 8, and fuel hose 9.
8 7
7. Connect the engine shut-off switch leads
0 and the warning indicator assembly
coupler A. (M model)
Connect the warning indicator assembly
coupler A and 10-pin main harness B to
the power unit. (E and W model)
5-53
Power unit
5
S67C5166
9
S67C5160
È
A
É
B
A
È M model
É E and W model
8. Connect the PTT motor leads C. (PTT
model)
Connect the PTT switch coupler D and
trim sensor coupler E. (R model with
PTT)
9. Connect the battery cables F. (E and W
model)
0
S67C5167
S67C5168
D
C
E
S67C5169
F
S67C5170
67C3K11