P/T Function Setting - Q-See QSLO2712 Manual

Hide thumbs

Table Of Contents

Table of Contents

■ Preset Speed Setting：

Operating method as follows:

1、Call preset 95 or 64 to enter into the main menu.

Move cursor to choose

2、

Press 【 OPEN】 key (open iris order) for confirmation， enter into

"Preset Speed Setting"

3、Use P/T up and down-ward order to change"Preset Speed"

(50-128grade available)

4、 Press 【 OPEN】 key (open iris order) to confirm saving the setting

and exit; Press 【CLOSE】 key (close iris order) to confirm losing

the setting and exit;

The most suitable "Preset Speed " is 124

● Preset Function Additional Instruction：

The Preset Function is used to save these parameters (P/T

hosizontal angle,vertical angle, lens' zoom under the present

situation), ensuring a fast call of these parameters as requested,

to make the camera adjusted to the needed position swiftly. It

supports presets 128 from No.1 to No.128(LG/CNB camera

series support presets 56), in which No.1-16 can be set as

character heading.

Operating method as follows:

1、When we use keyboard to save No.1-16preset, The words

"Save Preset

﹡﹡﹡

the screen

Meanwhile, under the"

be Preset Tilte Editting Area, then the users can choose to edit

or not.，as rightside fig：

2、If you want to edit the current preset tilte. Just use P/T right and

left-order to adjust the symbol"?" to the required position.

Then, use P/T up and down-order to adjust the needed

character back and forth. The symbol "?" stands for "blank",

skip the positions that don't need to edi and the characters need

to cancel can be replaced by "blank". After that, press【OPEN】

key (open the iris order), and save the current preset tilte

settings.

The following characters can be available： "A－Z "26

capitals， "a-z "26 small letters as well as"0－9 "10

numbers。

English

Preset speed】

【

in the【

will display on the left-upward of

Save Preset

﹡﹡﹡" will