Table of Contents
Advertisement
P/T Function Setting
Attention
:
Pattern's record will start from the time
when the dome exits the main menu to
the time when "Save Pattern" disappears.
And the tracks will be saved during this
time.
Run Pattern 1：
●
Remarks：
All the pattern running methods are the same, so we take "Run Pattern 1" as
Example.
Operating method as follows:
1、 Move the cursor to choose 【
the iris order) for confirmation, enter into "P/T Function
Setting Items"
2、Move the cursor to choose 【
Pattern】
【
. Press【OPEN】 key (open the iris order) for
confirmation, enter into "Run Pattern 1 " At this time, the dome
will exit the main menu and enter into Pattern 1 Running
Condition and the words "Run Pattern" will appears on the
screen's left upwards.
3 、 After exiting the main menu, the dome will be running
repeatedly according to former saved pattern 1 autoly.
4、 Pattern1 will be stopped to carry out a new order while receiving
any effective order, and the words "Run Pattern" will disappear.
Remarks：
All the pattern running methods are the same,
if you want to rerun a new pattern, you can
just repeate the above steps from 1-6.
Attention：
56
Pan
】 . Press 【 OPEN】 key (open
Run Pattern 1】in the
During the running, the words "Run
Pattern" will appear on the left-up
wards screen. When running
certain pattern, be sure that you
have saved the corresponding track,
or you will receive no response.
Save Pattern
Current Recording Situation
P/T Function Setting
Pattern
Patrol
Scan
Home place
Auto flip
On
Tilt Max speed 110
Pan Max speed 120
Preset speed
124
Patrol Setting
Setup Pattern 1
Setup Pattern 2
Setup Pattern 3
Run Pattern 1
Run Pattern 2
Run Pattern 3
Track Running
Run Pattern
English
Advertisement
Table of Contents
