Pattern - Q-See QSLO2712 Manual

Appendix Ⅵ：Basic Function Operation
Operation
（Pan and Tilt）
（Scan）
（Stop Scan）
(Frame Scan)
(Auto Scan)
(Preset)
Special orders of presets:

(Pattern)

（ZOOM WIDE）
（ZOOM TELE）
Attn：Turning 3D joystick
clockwise or anticlockwise
is equal to " 【 ZOOM
TELE】"and "【ZOOM
WIDE】" in function.
（Auto Iris）
（Auto focus）
（Privacy Zone）
（Alarm）
English
Move the joystick back and forth, up and down
All the effective order can stop scan
Call preset 98（98+PRESET）
Call preset 99（99+PRESET）
1． When setting preset， press preset No.+ "PRESET" key （It's about
3 econds until editing menu appears on the screen.）
2．When calling preset, press preset No.+"PRESET" key.
3 ． Keyboard setting and PTZ preset setting may vary from
manufacturer tomanufacturer, Concerning the specific details,
please refer to present cotroller's operating instruction.
Regarding other function settings of preset, please refer to preset speed
setting and additional remarks of functions from P67-68
Call preset No.33（33+PRESET）――carry out 180deg auto flip
Call preset No.34（34+PRESET）――execute P/T zero recovery
function horizontally
Call preset No.64（64+PRESET）――enter into main menu
Call preset No.95（95+PRESET）――enter into main menu and stop
PATTERN recoding
Call preset No.96（96+PRESET）――pattern1
Call preset No.97（97+PRESET）――preset1 scan
Call preset No.98（98+PRESET）――frame scan
Call preset No.99（99+PRESET）――auto scan
1． When setting pattern, press pattern No.+"PATTERN"key （It is
about 3 seconds until "PROGRAMMING PATTERN" appears on
the screen ） ， then set the patrol route, press "ACK" for
confirmation.
2． When calling pattern, press pattern No. +"PATTERN" key
3． Through "Pan→Pattern" item, set and call pattern scan
4. Keyboard setting and PTZ preset calling methods may vary from
manufacturer to manufacturer, Concerning the specific details, please
refer to present cotroller's operating instruction.
Press "ZOOM WIDE" or turn joystick anticlockwise
Control zoom according to the following steps:
1． Press "ZOOM TELE" key or turn joystick clockwise to the
pictures you need.
2． Turn on the button or joystick
1、 To achieve successive digital zoom, press the button or turn the
joystick directly to the picture you need or reach digital zoom
range
Auto or manual，iris can adjust itself to the best brightness
Auto or manual, focus speed adjustable 0-7 grade
The users can cover the privacy zones by this item, and it can support
multi privacy zones. (The area can be set freely) And the privacy zone
can be moved along with Dome structure.
Concerning the operation details, please refer to P28-29 or P46-48.
It support 4ch alarm input, 2ch alarm output, each alarm–connecting
situation and alarm output terminal can be programmed on the menu.
Regarding the specific details, please refer to P72-73
Methods
81