Table of Contents
Advertisement
B
Pan Function Setting:
Main Menu
Camera
Pan
Info
Alarm
Self act
Nothing
Lerisure Time
005
Address
001
System reset
P/T Speed will change along with lens' zoom in propotion under the propotional "Changing P/T Speed
Mode" item. P/T Speed will decrease according to the increasing of lens' zoom. Therefore, the pictures
will keep clear on the monitor during the fast moving of the P/T.
■ Pattern Setting
This item can reach domes' successive
record within one minute patrol at least. It
includes : P/T Control; Camera normal
control(Focus, len zoom); as well as Preset
Function Operation. When carrying out this
item, the dome will be running according
to the recorded patrol repeatedly. And three
patrols are available.
■ Patrol Setting
Through this item, we can arrange the
recorded preset into different patrols
according to the required orders. And the
preset point speed and parking time can be
set separately. When running patrol, various
preset points will be called ordely one by
one. Three patrols are available and each can
contain 32 presets.
Scan Setting
■
（refer to P60-64）
It support many scan modes, such as
auto scan, frame scan and so on. The
operaters can set "scan speed",
"Sacn TP", "Scan Limit L/R"(can be
set in the same location) After
receiving the scan orders, the camera
will be running according to the scan mode
setup.
54
P/T Function Setting
Pattern
Patrol
Scan
Home place
Auto flip
Tilt Max speed 110
Pan Max speed 120
Preset speed
（refer to P55-56）
（refer to P57-59）
■ Pattern Setting
■ Patrol Setting
■ Scan Setting
■ Home Place Setting
On
■ Auto Flip Setting
■ Pan Max Speed
■ Tilt Max Speed
124
■ Preset Speed Setting
■ Home Place Setting
When running this item, the system will
keep the present position as the home place
■ Auto Flip Setting
This item can reach dome's 180 rotation
vertically to get a cpmplete monitoring.
"On" or "Off" are selectable means
"Open or Close the Auto Flip Setting"
■ Tilt Max Speed Setting
P66）
It is based on human-oriented design, the
users can adjust the Tilt Max Speed as
their pleases according to the practical
requirements
■ Pan Max Speed Setting
to P66）
It is based on human-oriented design,the
users can adjust the Pan Max Speed as
their pleases according to the practical
requirements
■ Call Preset Speed Setting
（refer to P67－68）
It is based on human-oriented design, the
users can adjust the Preset Speed as their
pleases
according
requirements.
（refer toP65）
（refer to P65）
（refer to
（refer
to
the
practical
English
Advertisement
Table of Contents
